Posted on

Legacy Aspen EFD? Factory Repair Ends December 1

Receiver on a hangar workbench next to an open aircraft logbook, pen and coffee mug

Aspen Avionics will stop repairing, rebuilding and exchanging first-generation EFD1000 and EFD500 displays after December 1, 2026, or sooner if its parts inventory runs out. If your panel has one of these and it fails after that date, there’s no factory repair path. Lead times before then could get considerably longer.

What Aspen announced

Aspen says repairs, rebuilds and exchanges for the legacy EFD1000 and EFD500 Evolution displays “will continue only while existing parts inventories last or until Dec. 1, 2026,” and that repair lead times “could become considerably longer” before that (Just Helicopters, 2026). The reason given is parts obsolescence.

Aspen’s own site advertises a Trade In Trade Up to Aspen MAX program for Evolution displays. The prices are listed on that page (checked 2026-11-03). The page doesn’t say what installation work is involved, so ask your dealer for a full quote. A dealer has also posted Aspen’s service-change notice (Sarasota Avionics).

What isn’t affected

The same report says the change leaves these alone (Just Helicopters, 2026):

  • Aspen’s newer MAX and E5 displays
  • Batteries, RSM units, ACUs, configuration modules and EA100 autopilot adapters

Check your display’s model and version in the logbook or on the unit. Only the legacy (non-MAX) EFD1000 and EFD500 are in scope.

What to do before December 1

  1. Confirm which version you have. Legacy and MAX look alike from the left seat, so don’t guess.
  2. Ask your avionics shop about open squawks now. A display that’s flaky today is the one to send in before the deadline.
  3. Get a MAX trade-in quote from Aspen or your dealer, so you can compare it with keeping the display as it is.
  4. Decide what you’ll do if a squawk turns up after that date. For many owners the answer is a swap, so know the cost and the downtime before you need it.

Keep a second source in the cockpit

A portable receiver isn’t a substitute for a panel display. It does give you a second, independent view of traffic and weather while your display is in the shop or if it fails.

A Stratux receiver is ADS-B In only. In the US, a portable ADS-B In receiver needs no certification. The optional AHRS board adds attitude to apps with synthetic vision. It isn’t certified, and no portable AHRS from any maker is. Treat it as a backup aid and keep the panel as your primary reference. More in our AHRS guide.

Why we build receivers to be repaired

When one factory is the only place a part can be fixed, its timeline becomes yours. A Stratux is built from standard components. A failed part is a small repair, not the end of the unit. We keep parts available for 11 years. The repair philosophy explains how that works.

FAQ

Does this affect my MAX EFD1000 or EFD500?
Not according to the report. MAX and E5 displays are unaffected (Just Helicopters, 2026). Confirm with Aspen or your dealer using your serial number.

Will my legacy display stop working on December 1?
Nothing in the announcement says it will. What ends is Aspen’s repair, rebuild and exchange service.

Can a Stratux replace my Aspen display?
No. A Stratux is a portable ADS-B In receiver. It sends traffic and weather to your tablet, and it doesn’t replace panel instruments.

Where do I get the official word?
Aspen Avionics or your avionics dealer. We’re a receiver shop, not an Aspen dealer, so check the details with them before you decide.

Next step

Find out today whether your display is legacy or MAX. If it’s legacy, call your avionics shop. If you want a second source of traffic and weather in the meantime, see the Stratux with internal GPS.

Compatible with ForeFlight® and most other EFBs via standard GDL90.